 |
 |
 |
|
MRT's straight pipe design takes your Maverick from the absolutely
silent stock sound to an absolutely aggressive exhaust presence. This Sport Truck axle-back is the best 2022 Ford Maverick aftermarket accessory and is the
toughest-sounding Maverick exhaust MRT sells. Enjoy an aggressive tone at WOT and acceleration and a distinct note under all driving conditions. MRT engineered this system as a
rear exit, single tip exhaust available with a polished OR black matte 3.5" stainless steel tip. The Sport Truck exhaust lets the 2.0L engine breathe easily for performance and GREAT, sport performance sound. You will Hear the Difference and Get Noticed with this premium exhaust.
This MRT Sport Truck axle-back is handcrafted in the highest quality, premium, corrosion resistant, 2.5" T304 Stainless Steel and 100% made in the USA. MRT engineered a straight through design with increased tube diameter so the exhaust path is open and smooth. Maximum air flow equals minimum back pressure which give you fuel economy, performance sound and most importantly, AGGRESSIVE EXHAUST SOUND with this Sport Truck axle-back on your Maverick.
MRT designed premium exhaust accessories to meet all owners needs:
- For a more on-demand performance sound that you control, MRT's Street Performance axle-back is your choice - MRT Part #92W310
- For more exhaust show and go, a dual tip exhaust system based on the MRT Street performance axle-back is your choice - MRT Part #92W312.
- For a limited time, receive a free Maverick MRT hood strut kit with every Maverick MRT exhaust purchase.
Application: 2022+ Ford Maverick 2.0L Ecoboost AWD
Doesn't Fit: 2022+ Ford Maverick 2.5L Duratec Hybrid / FWD
Hear the Difference
- How does it sound? The Maverick Street Performance Axle-back #92W300 has an aggressive rumble
- Is there drone or resonance? There's a nice exhaust presence with minimal drone
- What if I step on it? An aggressive exhaust note that is sure to be noticed!
Are you located close to Plymouth, MI and need your exhaust system installed? Call MRT at 734-455-5807 to make an appointment today!
Product Quality
- What kind of steel is it made from? Corrosion-resistant T304 stainless steel.
- Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA.
- How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)
Feel the Performance
- What is the muffler design? Straight through design to provide maximum exhaust gas flow.
- What is the tube diameter? A large 2.5" tube is used for reduced exhaust flow restrictions.
- What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains.
Get Noticed
- What kind of tip is it? MRT exhaust has 3.5" angle cut tip.
- What are my tip finish options? Standard in polished tip or black matte finish for incremental cost.
- How do I get noticed? Great sound and great looks turn heads and get positive comments!
- Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
- How long does it take to install? Installation time is about 1 hour and requires only common hand tools.
- What is included? All necessary hardware included.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- DIY installation for the backyard mechanic
- T304 Stainless Steel for the best corrosion resistance
- Engineered, designed and manufactured in the USA
|
|
|
|
|
|
|
Repeat Customer 
Great exhaust horrible clamps