2019+ Jeep Gladiator MRT Trail Rated JT T304 Performance Exhaust System #92R145

MRT 304 Stainless Resonator Delete: 2019+ Jeep Gladiator JT 3.6L #92R145

2019+ Jeep Gladiator MRT Trail Rated JT T304 Performance Exhaust System #92R145 - Image 1 of 0

2019+ Jeep Gladiator MRT Trail Rated JT T304 Performance Exhaust System #92R145 - Video 2 of 1

2019+ Jeep Gladiator MRT Trail Rated JT Exhaust

2 Reviews

Retail Price: $107.99

You Save: $

Loudness: 2 Drone: 2 Performance: 2

Application: 2019+ Gladiator JT 3.6L
Tune: None Required
Time to Install: 60 Minutes

Item Code: 92R145

Usually Ships in 1 to 2 Business Days

This product qualifies for FREE SHIPPING!

Qty:

Jeep Gladiator JT Trail Rated Resonator Delete Exhaust

Part Number: 92R145
Application: 2019+ Jeep Gladiator JT 3.6L V6
Installation Time: 60 minutes
Warranty: Limited Lifetime

Budget-Friendly Performance Sound for 2019+ Gladiator JT

Enhance your 2019+ Jeep Gladiator JT with MRT's Trail Rated resonator delete, the perfect entry-level exhaust upgrade for owners seeking subtle performance character without aggressive loudness or excessive cost. This straightforward resonator delete system replaces the restrictive factory resonator with a straight pipe, delivering refined on-demand sound that activates when you accelerate while maintaining civilized cruising manners.

Constructed from corrosion-resistant 2.5-inch T304 stainless steel, the Trail Rated resonator delete provides the ideal balance of enhanced exhaust tone, minimal drone, and exceptional value. This is the perfect choice for Gladiator owners who want to add a touch of performance character without the commitment or expense of a complete cat-back system.

The MRT Gladiator Trail Rated JT Exhaust system gives your Jeep just a little more sound and a soft rumble to spice things up a bit. Consistent with all MRT products this system is constructed in corrosion resistant 2.5" T304 Stainless Steel and is a Resonator Delete straight pipe replacement exhaust system for your Gladiator. MRT engineered this system to have a nice low tone to it when you get on the throttle that gets noticed without drawing unwanted attention. Drone is hardly noticeable providing a great driving experience to match your Jeep. This system provides increased performance from increased exhaust flow and was designed with street performance in mind.

If you're looking for a deep rumble with a louder sound level, check out MRT's Jeep Gladiator Off the Grid JT Cat-back. MRT Part #92R140.

Application: 2019+ Gladiator 3.6L JT

Hear the Difference

How does it sound? MRT Trail Rated Exhaust provides a refined on demand sound that is loud when you want it.
Is there drone or resonance? Minimal drone
What if I step on it? Wide-open throttle delivers a spirited and fun performance sound.

Are you located close to Plymouth, MI and need your MRT aftermarket exhaust installed? Call MRT at 734-455-5807 to make an appointment today!

Technical Specifications

Product Features

System Type: Resonator delete / straight pipe replacement
Material: T304 stainless steel construction
Tubing Diameter: 2.5 inches
Design: Straight-through pipe (no resonator)
Tips: None - retains factory exhaust outlets
Manufacturing: Assembled in Plymouth, Michigan
Hardware: Complete installation kit included
Compatibility: 2019+ Jeep Gladiator JT 3.6L V6

Performance Ratings

Loudness: 2/10 - Subtle enhancement, nearly stock-like
Drone: 2/10 - Minimal cabin resonance
Performance: 2/10 - Modest flow improvements
Value: 10/10 - Exceptional price-to-performance ratio

Upgrade Path and Options

Entry Point to Performance Exhausts

The Trail Rated resonator delete serves as an excellent introduction to exhaust modifications, allowing you to experience enhanced sound and performance before committing to more expensive systems. If you later decide you want more aggressive sound, you can upgrade to MRT's Gladiator cat-back systems while benefiting from the improved flow of the resonator delete in the meantime.

Looking for More Aggressive Sound?

If you're seeking a deeper rumble with louder sound levels, consider upgrading to MRT's Jeep Gladiator King of the Hill JT Cat-Back (Part #92R140). This complete cat-back system delivers maximum aggressive sound with a loudness rating of 9/10 while still maintaining tolerable drone levels for daily driving.

American Manufacturing and Warranty

Made in Michigan

Every Trail Rated resonator delete is engineered, designed and assembled at MRT's Plymouth, Michigan facility, ensuring consistent quality control and attention to detail. The American manufacturing process maintains strict standards for welding quality, fitment precision, and construction excellence.

Limited Lifetime Warranty

MRT backs the Trail Rated resonator delete with a limited lifetime warranty covering defects in materials and workmanship for as long as you own your Jeep Gladiator JT. This warranty protection reflects MRT's confidence in premium materials and manufacturing quality, even on budget-friendly products.

Performance and Sound Characteristics

Refined On-Demand Sound

Idle: Nearly stock-like with subtle performance undertone
Cruising: Civilized, refined tone with minimal intrusion
Acceleration: Spirited low rumble with fun performance character
Wide Open Throttle: Enhanced exhaust note with deeper tone
Drone Level: Minimal (2/10) - barely noticeable cabin resonance

The Trail Rated resonator delete is designed for street performance, delivering sound when you demand it while maintaining composure during relaxed driving. The low tone remains refined and pleasant rather than raspy or obnoxious, creating a mature performance character that suits the Gladiator's personality.

Improved Exhaust Flow

By replacing the restrictive factory resonator with a straight pipe, the Trail Rated system reduces backpressure and improves exhaust gas flow. While the performance gains are modest compared to complete cat-back systems (rated 2 out of 10), you'll still experience subtle improvements in throttle response and engine breathing.

The enhanced flow allows the 3.6L Pentastar V6 engine to breathe more efficiently, optimizing power delivery during acceleration and under load. These gains may be most noticeable during towing, hauling, or climbing grades where every bit of additional power and efficiency matters.

FAQs: 2019-Present Jeep Gladiator Exhaust with Resonator Delete

1. How does a resonator delete compare to a complete cat-back exhaust system?

A resonator delete replaces only the factory resonator section with a straight pipe, while a cat-back system replaces the entire exhaust from the catalytic converter to the outlet. The Trail Rated resonator delete (Part #92R145) delivers subtle sound enhancement with ratings of 2/10 for loudness, drone, and performance—perfect for owners wanting modest improvement at minimal cost. In contrast, MRT's Gladiator cat-back systems (like Part #92R140) deliver aggressive sound with ratings of 9/10 for loudness and performance but cost significantly more. The resonator delete is the budget-friendly option for subtle enhancement, while cat-back systems provide maximum performance gains and aggressive sound.

2. Will I need to cut my factory exhaust to install the resonator delete?

Yes, installing the Trail Rated resonator delete requires cutting the factory exhaust at specified locations to remove the resonator section, then installing the MRT straight pipe replacement. MRT provides detailed instructions indicating exactly where to cut, and the process is straightforward with a reciprocating saw or pipe cutter. Customer reviews confirm the fit is "right on" when following the instructions. Many installers complete the work with the exhaust still on the vehicle, which provides wiggle room for positioning. While cutting the factory exhaust may seem intimidating, it's a simple process that takes only 60 minutes with basic tools.

3. Is the resonator delete too quiet, or will I actually notice a difference in sound?

The Trail Rated resonator delete delivers noticeable sound enhancement while remaining civilized and refined. You'll hear a definite difference compared to stock, particularly when accelerating or at wide-open throttle, where the system reveals a spirited low rumble with fun performance character. However, with a loudness rating of 2/10, this is not an aggressive, attention-grabbing exhaust—it's designed for owners who want "just a little more sound" without overwhelming loudness. Customer reviews describe it as providing "louder exhaust without all the drone" and an "inexpensive way to give more sound." If you want maximum aggressive sound, consider MRT's cat-back systems instead.

4. Will the resonator delete cause annoying drone on the highway?

No, the Trail Rated resonator delete has minimal drone with a rating of just 2/10. Customer reviews specifically praise the lack of drone, describing it as "hardly noticeable" and providing "a great driving experience." This makes the system ideal for Gladiator owners who frequently drive highways, use their trucks for work, or carry passengers who prefer a quieter ride. You'll enjoy enhanced sound during acceleration without the constant cabin resonance that makes aggressive exhausts fatiguing on long trips. The refined character ensures comfortable daily driving and highway cruising while still delivering spirited sound when you want it.

5. Can I upgrade to a cat-back system later if I want more sound?

Yes, the resonator delete can be removed if you later decide to upgrade to a complete cat-back exhaust system. Many Gladiator owners use the resonator delete as an entry point into exhaust modifications, enjoying the subtle enhancement and improved flow while deciding if they want to invest in a more aggressive system later. The resonator delete provides immediate results at minimal cost, allowing you to experience exhaust modifications before committing to expensive cat-back systems. If you later upgrade to MRT's King of the Hill cat-back (Part #92R140), the entire system including the resonator delete section will be replaced with the complete cat-back components.

Ready to add subtle performance character to your Gladiator? Order the Trail Rated resonator delete today and enjoy free shipping. Budget-friendly enhancement with minimal drone. Questions? Call 734-455-5807 or use live chat during business hours.

Simple Installation and Construction

Straightforward Resonator Replacement

The Trail Rated resonator delete is designed for simple do-it-yourself installation in approximately 60 minutes. This straight pipe replacement system eliminates the factory resonator section, replacing it with a free-flowing T304 stainless steel pipe that connects to existing factory mounting points.

Installation Process:

Locate the factory resonator in the mid-section of the exhaust
Cut the factory exhaust at the specified locations (instructions included)
Remove the factory resonator section
Install the MRT straight pipe replacement
Secure with included hardware and hangers

All necessary hardware is included, and the installation can be completed with basic hand tools and a cutting tool (reciprocating saw or pipe cutter recommended).

Premium T304 Stainless Steel Construction

Despite the budget-friendly price point, MRT doesn't compromise on materials. The Trail Rated resonator delete is constructed from premium 2.5-inch T304 stainless steel that resists corrosion from mud, water, salt, and extreme temperatures. This professional-grade material ensures your resonator delete maintains its appearance and performance through years of use.

The straight-through design provides unrestricted flow through the replacement section, eliminating the restriction created by the factory resonator while maintaining structural integrity and durability.

Installation and Compatibility

DIY-Friendly Modification

MRT engineers designed the Trail Rated resonator delete specifically for straightforward DIY installation. The system requires cutting the factory exhaust at specified locations to remove the resonator, then installing the MRT straight pipe replacement. Detailed instructions guide you through the entire process.

Installation Requirements:

Time: Approximately 60 minutes
Tools: Basic hand tools, cutting tool (reciprocating saw or pipe cutter), penetrating oil, jack stands
Skill Level: Beginner to intermediate DIY mechanic
Modifications Required: Cutting factory exhaust at specified locations
Tuning Required: None

Perfect for First-Time Exhaust Modifications

The resonator delete is an excellent first exhaust modification for Gladiator owners new to performance upgrades. The simple installation process teaches fundamental exhaust work skills while delivering immediate results in sound and performance. Customer reviews consistently praise the ease of installation and perfect fitment.

Professional Installation Available

Located near Plymouth, Michigan? Schedule professional installation at MRT's facility by calling 734-455-5807. Expert technicians can install your resonator delete while you wait.

Reviews

Write a review »

Shawn from VT

December 21, 2021

Users found this review helpful:

Fit was right on

Install was very easy, I read through the instructions and cut away. I did everything while the exhaust is still on the gladiator and gave me some wiggle room to move the pipe, and then fasten in place. Fit was right on.

James D from Texas

August 14, 2021

A Must Have

Louder exhaust without all the drone -- inexpensive way to give more sound.

SEARCH