MRT 304 Stainless : 2019+ Silverado 1500 MRT Tough Truck Mid Pipe #92T107

2019+ Silverado 1500 MRT Tough Truck Mid Pipe #92T107 - Image 1 of 0

2019+ Silverado 1500 MRT Tough Truck Mid Pipe #92T107 - Video 2 of 1

2019+ Silverado 1500 MRT Tough Truck Mid Pipe

Name: 2019+ Silverado 1500 MRT Tough Truck Mid Pipe
SKU: 92T107
Price: 149.99 USD
Availability: InStock

Retail Price: $179.99

You Save: $

Loudness: 9 Drone: 1 Performance: 9

Application: 2019+ Chevy Silverado 1500. 5.3L V8
Tune: None Required
Time to Install: 90 Minutes

Item Code: 92T107

Usually Ships in 1 to 2 Business Days

This product qualifies for FREE SHIPPING!

Qty:

MRT Tough Truck Mid Pipe for 2019 Chevy Silverado 1500 5.3L (Part #92T107)

Performance Specs at a Glance

Loudness Rating: 9 out of 10
Drone Rating: 1 out of 10 (minimal drone)
Performance Rating: 9 out of 10
Tubing: 3-inch mandrel-bent T304 stainless steel
Install Time: Approximately 90 minutes
Tune Required: None
Application: 2019+ Chevy Silverado 1500 5.3L V8
Warranty: Limited Lifetime

Get More Sound and Performance from Your Silverado Without a Full Cat-Back

If you want a serious exhaust upgrade without replacing the entire system, the MRT Tough Truck Mid Pipe for the 2019 Chevy Silverado 1500 5.3L is the smart, cost-effective solution. This bolt-on mid-pipe is engineered by MRT's performance team to reduce back pressure, increase exhaust flow velocity, and deliver the aggressive, deep exhaust note your truck deserves.

The factory mid-pipe on the 2019 Silverado 1500 is a compromise. It is built for cost and compliance, not performance. The MRT Tough Truck Mid Pipe replaces that restrictive stock section with a precision-crafted upgrade that wakes up your 5.3L V8 and gives it the voice to match.

MRT designed a premium exhaust system for the all-new 4th Gen Chevy Silverado that increases your truck's power, fuel efficiency AND boosts your driving experience! The MRT Tough Truck Mid Pipe is one of MRT's loudest exhausts for the Silverado 1500 full size pickup. This Mid Pipe exhaust is made from corrosion resistant T304 Stainless Steel and sounds amazing -- This is the perfect attitude adjustment for your Silverado - This is how it should have sounded from the factory!

Team MRT engineered a tough-sounding, corrosion resistant, quality performance system with a Tough Truck sound that increases your Silverado's capabilities with an upgraded exhaust presence.

If you're looking to give your Chevy Silverado 1500 a moderate increase in loudness packed with a whole lot of performance, check out the MRT Deep and Mellow Cat-back.MRT Part #92T111 or for Maximum sound check our MRT's Tough Truck Cat Back

Application: 2019+ Chevy Silverado 1500, 5.3 V8 engine, Extended Cab, 4WD, 6.5 Foot Standard bed - Dual & Single Exit

Hear the Difference

How does it sound? MRT Tough Truck Mid Pipe gives an aggressive, get-noticed exhaust tone that is present at all times.
Is there drone or resonance? Minimal drone.

What if I step on it? Wide-open throttle brings out a livelier attitude with more exhaust sound, bite and a deeper growl.

Are you located close to Plymouth, MI and need your MRT aftermarket exhaust installed? Call MRT at 734-455-5807 to make an appointment today!

DIY installation for the backyard mechanic
T304 Stainless Steel for the best corrosion resistance
Engineered, designed and manufactured in the USA

Built from Premium T304 Stainless Steel

Material That Lasts

Every MRT mid-pipe starts with corrosion-resistant T304 stainless steel. This is the same material used across the entire MRT Silverado exhaust lineup. It handles extreme heat, road salt, moisture, and the chemical abuse of combustion gases without rusting out or deteriorating over time. This is a part you install once and keep.

Mandrel Bent for Maximum Flow

The tubing is mandrel-bent, meaning the pipe maintains a consistent internal diameter through every curve. Crush bending, which is common in OEM and budget aftermarket parts, collapses the tube at bends and creates flow restrictions. Mandrel bending eliminates that problem entirely, keeping exhaust gases moving fast and efficiently from the engine to the exit point.

Precision Fit for the 4th Gen Silverado

Part #92T107 is specifically engineered for the 2019 Chevy Silverado 1500 with the 5.3L V8 engine. No cutting, no welding, and no fabrication. The system uses the factory mounting locations for a clean, secure, rattle-free fitment.

What the MRT Tough Truck Mid Pipe Does for Your Silverado

Replacing the stock mid-pipe reduces exhaust back pressure, which is the resistance that fights against your engine every time you step on the throttle. Less resistance means the engine expels spent gases more efficiently, which frees up horsepower and torque that were previously being lost. Most drivers notice the improvement in throttle response immediately, especially in the low to mid RPM range, where daily driving and towing happen most.

Sound is the other immediate benefit. The Tough Truck tuning from MRT produces a deep, aggressive exhaust note that is present at all times. You hear it at idle, through gear changes, and especially at wide-open throttle. It also produces the satisfying burble on deceleration that performance truck owners love. The sound is loud and purposeful without being offensive or droning on the highway.

FAQs for 2019 Chevy Silverado Mid Pipe Exhaust Upgrade

What is the MRT Tough Truck Mid Pipe Part #92T107?

The MRT Tough Truck Mid Pipe Part #92T107 is a performance aftermarket mid-pipe designed specifically for the 2019 Chevy Silverado 1500 with the 5.3L V8 engine. It replaces the factory mid-pipe section to reduce exhaust back pressure, improve exhaust flow, and produce a deeper, more aggressive Tough Truck exhaust note.

What is a mid-pipe on a Chevy Silverado?

The mid-pipe is the exhaust section that connects the exhaust manifolds or headers to the muffler and rear exit. On the 2019 Silverado 1500, the factory mid-pipe uses crush-bent tubing and a restrictive design that limits exhaust gas velocity. An aftermarket mid-pipe like the MRT Tough Truck version uses mandrel bending and less-restrictive tubing to improve flow and performance.

Will the MRT Tough Truck Mid Pipe fit my 2019 Silverado 1500?

Part #92T107 is engineered specifically for the 2019 Chevy Silverado 1500 with the 5.3L V8 engine. Always confirm your engine and cab/bed configuration before ordering to ensure proper fitment.

Does this mid-pipe require an engine tune?

No tune is required. The MRT Tough Truck Mid Pipe is a direct bolt-on replacement that does not affect your Silverado's factory sensors, ECU, or engine management system.

How loud is the MRT Tough Truck Mid Pipe?

The Tough Truck sound profile from MRT is rated at a loudness level of 9 out of 10 across the MRT Silverado lineup. It delivers a deep, aggressive exhaust tone that is present at idle, through gear changes, and at wide-open throttle. Drone is kept to a minimum, making it comfortable for daily driving and highway use.

What material is the MRT Tough Truck Mid Pipe made from?

The mid-pipe is constructed from T304 stainless steel using mandrel bending for consistent diameter and optimal flow. T304 stainless resists rust, corrosion, road salt, and heat for long-term durability.

How long does it take to install the MRT Tough Truck Mid Pipe?

Most owners complete the installation in approximately 90 minutes using basic hand tools. No welding, cutting, or special equipment is required.

How does a mid-pipe upgrade differ from a cat-back exhaust system?

A cat-back exhaust system replaces everything from the catalytic converter back, including the mid-pipe, muffler, and tip. A mid-pipe upgrade replaces only the section between the catalytic converter and the muffler. The MRT Tough Truck Mid Pipe is a great option for Silverado owners who want meaningful performance and sound gains at a lower investment than a full cat-back system.

Can I pair the MRT Tough Truck Mid Pipe with an MRT cat-back exhaust?

Yes. MRT designs its exhaust components to work together. Pairing the Tough Truck Mid Pipe with an MRT Silverado cat-back system produces the maximum Tough Truck sound and performance benefit that MRT's engineering team has tuned for the 4th Gen Silverado platform.

Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
How long does it take to install? Installation time is about 1.5 hours and requires only common hand tools.
What is included? All necessary hardware included.

Easy DIY Installation, No Tune Required

Installation takes approximately 90 minutes with common hand tools. No engine tune is required after installation. The MRT Tough Truck Mid Pipe is a direct bolt-on replacement that works seamlessly with the Silverado's factory engine management system. No sensors, wiring, or ECU parameters are affected.

SEARCH