 |
 |
 |
|
Take the Jeep Wrangler Rubicon 392 experience to the next level with MRT's Street Race H Pipe. Team MRT designed this mid-pipe to replace the stock X pipe and resonator, giving the 392 a deeper tone when compared to the raspy notes of the X pipe under acceleration. By removing some of the restrictions on exhaust gas flow, a Wrangler Rubicon 392 Performance H Pipe also adds a few extra horsepower, giving the 6.4L HEMI V8 engine even more "oomph" for everything from rock crawling to road trips.
As a bonus, this performance exhaust retains the factory exhaust valve system so you can control the sound level depending on the driving situation. Open valves with the MRT H pipe produce a strong, confident start and idle presence that grows to a full performance sound at wide open throttle. Closed valves decrease the exhaust sound level, creating a subtle and refined note while cruising. At idle, the exhaust is quiet like the factory exhaust so the neighbors won't even know. It's the perfect combination of family-friendly and all-out attitude in a single part.
Rubicon 392 H Pipes with A+ Performance
Installing this H pipe system is a wonderful addition to this iconic off-road capable Jeep SUV that's sure to delight you and your exploring buddies. The MRT H Pipe Resonator Delete is constructed of corrosion-resistant T304 stainless steel, making it a premium exhaust suitable for V8 HEMI engine power and durability. We use large three-inch tubing with a straight-through design for noticeable gains wherever and however you drive.
We know how much Jeep owners love working on their vehicles, and the Rubicon 392 Exhaust H Pipe is designed with this in mind. All hardware is included for DIY installation - which takes an hour or less. Click on the "Installation Instructions" tab for a step-by-step guide put together by our team.
Have we mentioned this Wrangler JL Rubicon 392 exhaust upgrade comes with a limited lifetime warranty? For as long as you own your Jeep, you'll Hear the Difference, Feel the Performance and Get Noticed. Call us at 734-455-5807 or use live chat during business hours if you have any questions.
Application: 2021-24 Jeep Wrangler Rubicon 392 6.4L HEMI V8
Doesn't Fit: Other Jeep Wrangler models
Hear the Difference
- How does it sound? The MRT Street Race Exhaust gives an aggressive, get noticed exhaust tone that is always present.
- Is there drone or resonance?The drone is noticeable but tolerable.
- What if I step on it? Wide-open throttle brings out a livelier attitude with more exhaust sound, more bite and a deeper growl.
Are you located close to Plymouth, Michigan and prefer to have your MRT aftermarket exhaust installed? Call MRT at 734-455-5807 to make an appointment today!
Jeep Wrangler Rubicon 392 Street Race H Pipe Exhaust
Jeep Wrangler 392 MRT Street Race H Pipe Installation
Rubicon 392 MRT H Pipe Review and Ride Along
Product Quality
- What kind of steel is it made from? Corrosion-resistant T304 stainless steel.
- Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA.
- How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)
Feel the Performance
- What is the muffler design? Straight through design to provide maximum exhaust gas flow.
- What is the tube diameter? A large 3" tube is used for reduced exhaust flow restrictions.
- What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains.
Get Noticed
- What kind of tip is it? There are no tips on this system.
- What are my tip finish options? None.
- How do I get noticed? Absolutely! A deep muscle car growl on acceleration and factory like idle sound
Installation
- Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
- How long does it take to install? Installation time is about 1 hour and requires only common hand tools.
- What is included? All necessary hardware included.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- DIY installation for the backyard mechanic
- Mid-pipe and resonator delete with H-pipe exhaust configuration
- Retains factory exhaust valves
- T304 stainless steel construction for corrosion resistance
- Engineered, designed and manufactured in the U.S.
|
|
|
|
|
|
|
Awesome 
