 |
 |
 |
|
Shake up your Chevrolet Blazer RS with a sporty, street-inspired performance sound exclusively brought to you by MRT. This MRT Sport Touring axle back exhaust has a definite "look at me" factor presenting a unique tone and standard polished 3" quad tips that will Get Noticed. MRT's y-pipe axle back design is paired with the MRT drone management
system (DMS) to manage exhaust sound waves and minimize interior cabin
drone.
How does it sound? Well, at idle and start-up you hear a
low, deep exhaust rumble the wakes the system up and says I'm ready
when you are. In steady state driving, there is mild in-cabin presence
with a mellow performance sound that is not offensive and actually
matches the feel of acceleration. When you put your pedal to the metal, there's a more aggressive street performance Hear the Difference sound worthy of a Chevy Rally Sport vehicle.
Easy installation is a natural for this direct bolt on factory replacement exhaust system designed with 2.5" mandrel bent T304 stainless steel and 100% handcrafted in the USA. MRT's focus on excellence goes into every detail of the construction and
design of this quality, premium axle-back exhaust system. Shiny 3" polished Quad tips are standard with a stealthy Black ops matte
high-temperature finish also available for black tips that complement the rear bumper.
MRT designed this system to respect the signature Rally Sport history with an exhaust note that sings a steady performance tune on open roads and resonates clear and strong on any closed circuit road traveled so you can Feel the Performance of this aftermarket system. Each MRT product is backed by MRT's limited lifetime warranty.
Application: 2019+ Blazer RS 3.6LV6
Doesn't Fit: 2019+ Blazer LT1 V6, 2.5l I4 or 2.0l Turbo (MRT Part #92T120 fits 2019+ Blazer LT1 V6)
Hear the Difference
- How does it sound? The MRT Version 3 axle-back #92T122 has a street performance sound.
- Is there drone or resonance? Mild in cabin presence with minimal drone
- What if I step on it? Wide-open throttle increases exhaust loudness with a aggressive acceleration
MRT designed this version 3 axle-back system as a direct fit for your 2019+ Chevy Blazer RS. Professional installation is available by one our talented mechanics located in Plymouth, MI with an estimated 1-hour installation process. If you're in our neighborhood, call MRT at (734) 455-5807 to schedule an appointment.
92T120: 2019+ Blazer RS MRT Version 3 Axle-back Quad Tips
Product Quality
- What kind of steel is it made from? Corrosion-resistant T304 stainless steel
- Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA
- How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)
Feel the Performance
- What is the muffler design? Straight through design to provide maximum exhaust gas flow
- What is the tube diameter? A large 2.5" tube is used for reduced exhaust flow restrictions
- What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains
Get Noticed
- What kind of tip is it? Dual 3" T304 stainless steel tips with beveled edges
- What are my tip finish options? Stylish Polished Stainless Steel or Black Ops Matte Ceramic
- How do I get noticed? Great sound and great looks turn heads and get positive comments!
Installation
- Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
- How long does it take to install? Installation time is about 1 hour and requires common hand tools.
- What is included? All necessary hardware included.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 3" double walled quad tips - polished or black matte
- Sporty, street performance exhaust sound for the Get Noticed factor
- T304 Stainless Steel for best corrosion resistance
- Engineered, designed and manufactured in the USA
|
|
|
|
|
|
|
2021 Blazer RS Version 3 Exhaust 
