2010-2014 Ford F150 SVT Raptor MRT Deep and Mellow Cat-Back Exhaust System

Owners of the 2010-14 Ford SVT Raptor aren't satisfied with the status quo - otherwise you'd have a boring stock F150. We know how unique the Raptor line is, so we've designed a line of exhaust to enhance your truck's presence as you leave others in the dust - a sound so you can Get Noticed all over again. The Raptor MRT Deep & Mellow Cat Back delivers an on-demand sound that balances a tough growl when you rev up and a refined rumble at idle. On-road or off-road, it will make getting behind the wheel a whole new experience: the Deep & Mellow line is a great option for those looking to enhance their exhaust presence without disturbing neighbors or sacrificing the comfort of the ride. The reasons you'll love your new MRT Deep & Mellow Cat Back system doesn't stop with the sound: we engineered a large, smooth and gently curved Ford F150 exhaust pipe and combined it with a straight-through muffler to produce increased exhaust flow. Not only will your truck have a louder, richer exhaust note, but it will also gain noticeable horsepower, torque and fuel economy. It's one of the most cost-effective ways to upgrade your F-150 Raptor and keep it at the head of the pack.

Be a Beast with the Right Exhaust System

Every MRT Ford Raptor Cat Back Exhaust is constructed from T304 stainless steel right here in the U.S. This system includes three-inch mandrel bent tubing and dual four-inch double-wall, polished T304 stainless steel tips with beveled edges. Black Ops finished exhaust tips are available for an added fee for a blackout look. This system is engineered for the best sound to match your vehicle.

The Deep & Mellow Cat Back is quieter than the MRT Tough Truck Cat Back with (Part #91K101) but louder than your stock Raptor. It has just enough exhaust presence with elevated sound to Get Noticed, plenty of opportunity to Feel the Performance and is packaged in a design without excessive drone. DIY backyard installation takes about 90 minutes using standard hand tools - you don't even need a tuning. We inspect each system a minimum of four times to ensure quality and back them with a limited lifetime warranty.

Application: 2010 F-150 SVT Raptor with optional 6.2L V8 engine. Also fits 2011 through 2014 F150 SVT Raptor.

Doesn't Fit: 2010 F-150 SVT Raptor with 5.4L V8 engine.

Hear the Difference

• How does it sound? MRT Deep & Mellow Cat Back provides a refined, on-demand sound that is loud when you want it.
• Is there any drone or resonance? Minimal drone.
• What if I step on it? Wide-open throttle delivers a spirited and fun performance sound.

Are you located close to Plymouth, Michigan and need your MRT aftermarket exhaust installed? Call MRT at (734) 455-5807 to make an appointment today!

• DIY installation for the backyard mechanic.
• Made of T304 stainless steel for the best corrosion resistance.
• Engineered, designed and manufactured in the U.S.

FAQs: 2010-2014 F150 Performance Exhaust Upgrades

What years and engines does this exhaust fit?

This system fits the 2010 Ford F150 SVT Raptor with the optional 6.2L V8 engine, as well as all 2011 through 2014 Ford F150 SVT Raptor models. It does not fit the 2010 F150 SVT Raptor equipped with the 5.4L V8 engine.

What does the MRT Deep and Mellow Cat-Back sound like on the first-gen Raptor?

At idle, it produces a deep, refined rumble that gives the SVT Raptor noticeably more presence and personality than stock. Under acceleration and at wide-open throttle, it opens into a spirited, fun exhaust note that is rewarding without being overpowering or antisocial.

How much drone does this system produce during highway driving?

MRT rates the drone at a 2 out of 10. The system is engineered specifically to minimize low-frequency cabin resonance at highway cruising speeds, so long drives remain comfortable while the exhaust note is still clearly present and enjoyable.

How does this system compare to the MRT Tough Truck DMS Cat-Back (91K101) for the same years?

The Deep and Mellow Cat-Back is quieter and more refined than the Tough Truck DMS system. Choose the Deep and Mellow if you want an enhanced, on-demand sound that complements everyday driving. Choose the Tough Truck DMS if you want the loudest, most aggressive, and always-on exhaust note available from MRT for the 2010 through 2014 Raptor.

Will this exhaust improve horsepower, torque, and fuel economy on my Raptor?

Yes. The straight-through muffler design and 3-inch mandrel-bent tubing work together to reduce exhaust back pressure and maximize flow. The result is noticeable improvement in horsepower, torque, and fuel efficiency that you will feel on both road and trail.

Do I need a tune after installing this cat-back?

No tune is required. This is a direct bolt-on replacement that works with the factory ECU on the 2010 through 2014 F150 SVT Raptor without any additional programming or calibration.

How long does installation take, and what tools do I need?

Installation takes approximately 90 minutes using only common hand tools. All necessary hardware is included. This system is designed for a straightforward DIY install in a home garage, making it accessible to any backyard mechanic.

What tip finish options are available?

Two finishes are offered: polished T304 stainless steel for a clean, premium look, and Black Ops matte ceramic for a stealthy blacked-out appearance. The Black Ops option is available at an additional cost.

Is each system inspected before it ships?

Every MRT exhaust system is inspected a minimum of four times at the Plymouth, Michigan facility before it ships to ensure quality meets MRT's standards.

What warranty comes with this exhaust system?

This system is backed by MRT's Limited Lifetime Warranty. Full warranty terms are available on the warranty page at shopmrt.com. For questions, call MRT at (734) 455-5807 or schedule a professional installation appointment at the Plymouth, Michigan facility.

• Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
• How long does it take to install? Installation time is about 1-2 hours and requires only common hand tools.
• What is included? All necessary hardware included.