2010–15 Camaro V6 MRT Version 1 Axle-Back Exhaust System

Loud, Deep Muscle Car Sound for Your Gen 5 Camaro V6

The fifth-generation Camaro V6 was born to turn heads. The MRT Version 1 Axle-Back makes sure everyone hears it coming. Engineered for drivers who want a loud, aggressive, always-present muscle car exhaust note from their 3.6L V6 Camaro, the Version 1 sits a full tier above the Sport Touring sound of the Version 2, deeper, louder, and more commanding from the first start to the last throttle pull of the day.

With a loudness rating of 8/10 and a straight-through muffler design backed by more than 35 years of OE and aftermarket automotive engineering experience, the Version 1 delivers a sporty muscle car rumble that makes every drive in your Gen 5 Camaro feel like the performance car experience it's supposed to be. It's louder than the mellow Version 2, more street-friendly than the aggressive Version 3, and built entirely from T304 stainless steel with a limited lifetime warranty and a 60-minute DIY install.

Fifth-generation V6 Camaros are already one of the best pony cars on the road - but with a performance Camaro exhaust system, there's no doubt who's driving to the top. The MRT Camaro V6 Version 1 Axle back system has a loud, deep muscle car sound and is handcrafted entirely in corrosion-resistant T304 stainless steel. With a design backed by more than 35 years of OE and aftermarket automotive engineering experience, this DIY Camaro exhaust offers excellent tone and increased power while being an upgrade than even less-experienced enthusiasts can install themselves.

Sport Performance V6 Camaro Exhausts

The six-cylinder Camaro is considered the perfect "in-between" vehicle for people who want something more than an ordinary sedan but may not have the budget for a V8 Camaro 2SS, LT1 or ZL1. An MRT Version 1 Camaro Axle back is in the same class. Our Version 1 exhaust is made for a sporty muscle car rumble, which is louder than the mellow Version 2 but more street-friendly than the aggressive Version 3. Meanwhile, axle back Camaro exhausts provide amazing sound and a moderate power boost while being less expensive and easier to install than a cat back system.

All systems have 2.5-inch mandrel-bent tubes and a straight-through muffler to increase exhaust flow. The base systems include T304 polished SS 3.5-inch tips that add visual pop. If you're looking for more of the Get Noticed factor, a 4-inch polished tip is available. For those who want to be more "stealth-like," a Black Ops tip finish is available for an additional fee. Black Ops is a high-temperature ceramic coating in a black matte finish. Select your exhaust tip style from the Available Options dropdown.

This system is engineered for the best balance of performance sound in "spirited" driving. For V6 Camaros, that means a comfortable exhaust presence in highway driving and a managed exhaust sound at low speed and idle.

American Muscle Exhaust Performance

The Version 1 MRT performance series has just enough exhaust presence with an elevated sound to Get Noticed. It will also offer plenty of opportunities to feel the performance. It is packaged in a design without the excessive drone so you can focus on the beautiful sound.

Whether you're looking for a 2010 Camaro V6 exhaust or an exhaust for 2015 Camaro V6 use, this could be the best exhaust for Camaro V6 upgrades you will ever see. MRT designs, engineers and manufactures all fifth-generation Camaro exhaust systems in the U.S. and backs them with a limited lifetime warranty.

Application: 2010 thru 2015 Camaro V6 3.6L (both coupe and convertible).

Doesn't Fit: Camaro V6 GFX Package (factory ground effects option) - use MRT Part #91A179.

Hear the Difference FAQs

• How does it sound? The MRT V6 Version 1 Axle back #91A176 has a loud, deep muscle car sound.
• Is there drone or resonance? The drone is noticeable but tolerable.
• What if I step on it? Wide-open throttle increases exhaust loudness and tone to an aggressive performance sound.

Are you located close to Plymouth, Michigan and need your MRT aftermarket exhaust installed? Call MRT at 734-455-5807 to make an appointment today!

FAQs About Axle Back Exhausts for 2010-2015 V6 Camaros

1. Will the MRT Version 1 Axle-Back fit my Camaro V6?

The MRT Version 1 Axle-Back (Part #91A176) is designed for 2010–2015 Chevrolet Camaro models equipped with the 3.6L V6 engine in both coupe and convertible body styles. It does not fit Camaro V6 models with the factory GFX Package (ground effects option); those owners should use MRT Part #91A179 instead. If you're unsure whether your Camaro has the GFX Package, check your build sheet or call MRT at 734-455-5807 before ordering.

2. How does the Version 1 compare to the Version 2 and Version 3 in terms of sound?

The three versions represent three distinct sound profiles tuned for different drivers. The Version 1 (Street Race) is louder than the Version 2, rated 8/10 loudness with a 5/10 drone rating, an always-present aggressive muscle car tone with noticeable but tolerable highway drone. The Version 2 (Sport Touring) is rated 7/10 loudness with a much lower 2/10 drone rating, making it a better fit for daily drivers who prioritize comfort alongside character. The Version 3 (Extreme) is MRT's most aggressive and loudest Camaro V6 axle-back option for owners who want no compromises on sound presence. If you want to be heard everywhere, every time, the Version 1 is your pick. If you commute regularly and want less drone on the highway, the Version 2 is worth considering.

3. Is the Version 1 too loud or droney for daily driving?

That depends entirely on how much sound presence you want. The Version 1 carries a drone rating of 5/10, which means highway resonance is genuinely noticeable at cruise speeds, more present than the Version 2's 2/10 rating. For drivers who prioritize aggressive street sound and can accept cabin resonance as part of the package, it's a tolerable and rewarding trade-off. For drivers who do long daily highway commutes and want minimal fatigue, the Version 2 is the more practical daily driver choice. Many Version 1 owners describe the highway drone as present but acceptable once they've settled into the overall sound experience.

4. Will the Version 1 Axle-Back improve performance on the 3.6L Camaro V6?

Yes. The straight-through muffler design and 2.5-inch mandrel-bent tubing improve exhaust gas flow through the rear section of the system compared to the factory mufflers. This reduction in backpressure delivers a noticeable boost in throttle response and power across the RPM range. Additionally, the Version 1 comes in significantly lighter than the stock mufflers, which contributes a real reduction in rear-end weight. No ECU tuning is required; all gains are available immediately from installation.

5. What tip options are available and what's the difference?

The Version 1 is available in four tip configurations: 3.5-inch polished T304 stainless, 3.5-inch Black Ops matte black, 4-inch polished T304 stainless, and 4-inch Black Ops matte black. The polished options deliver a classic, clean mirror shine. The Black Ops finish uses a high-temperature ceramic coating for a bold matte black look that pairs especially well with RS packages and dark-trimmed builds. The 4-inch tips provide more visual impact at the rear fascia for owners who want the boldest possible look. All four options feature double-wall construction with beveled edges.

6. How difficult is the installation, and what's included?

Installation requires only common hand tools and takes approximately 60 minutes for most owners working in their own driveway or garage. No welding, cutting, or modifications are required at any step. All necessary hardware is included with your purchase, along with detailed step-by-step installation instructions. If you'd prefer professional installation and are located near Plymouth, Michigan, call 734-455-5807 to schedule an appointment at MRT's facility.

7. Why choose MRT over other Camaro V6 exhaust brands?

MRT brings more than 35 years of OE and aftermarket exhaust engineering experience to every system they build. That means consistent fitment, precision welds, and real quality control on every unit. The Version 1 is backed by a limited lifetime warranty, built from T304 stainless steel throughout, and supported by 19 verified buyer reviews that consistently confirm the sound, fitment, and build quality live up to what's promised. For the Gen 5 Camaro V6, it's one of the most thoroughly proven exhaust upgrades on the market.

Ready to give your Camaro V6 the aggressive muscle car sound it was always supposed to have? Order today and enjoy free shipping on your MRT Version 1 Axle-Back. Questions? Call 734-455-5807 or use live chat during business hours.

Installation Made Easy

Simple 60-Minute DIY Installation

The Version 1 Axle-Back is engineered for clean, straightforward do-it-yourself installation. Using only common hand tools and approximately one hour of work time, most owners complete the installation in their own driveway or garage. No welding, cutting, or modifications are required. All necessary hardware is included with your purchase, along with detailed step-by-step installation instructions.

Professional Installation Available

Located near Plymouth, Michigan? Call 734-455-5807 to schedule professional installation at MRT's facility. With more than 35 years of exhaust experience, MRT's team can install your Version 1 Axle-Back while you wait.