 |
 |
 |
|
For the Ford Maverick owner who wants to customize their truck to get a more sporty, performance sound, MRT designed the Street Performance Truck Exhaust. This axle-back is a straight through muffler design, that tones down the exhaust presence giving it a clean exhaust note that's not overpowering. You'll have more sound at wide-open throttle and acceleration with a subtle hum and rumble while cruising and idling. This axle-back is a rear exit, single tip exhaust available with a polished OR black matte 3.5" stainless steel tip that is sure to get your Maverick noticed!
This MRT Street Performance Truck Exhaust is handcrafted in the highest quality, premium, corrosion resistant, T304 Stainless Steel and 100% made in the USA. MRT engineered a straight through design with increased tube diameter so the exhaust path is open and smooth. Maximum air flow equals minimum back pressure which give you fuel economy, performance sound and most importantly, FUN with this Street Performance axle-back.
MRT designed premium exhaust accessories to meet all owners needs:
- For a more pronounced, aggressive performance sound, MRT's Sport Truck axle-back is your choice - MRT Part #92W300.
- Also, a dual tip exhaust system based on the MRT Street performance axle-back for a little more show and go - MRT Part #92W312.
- For a limited time, receive a free Maverick MRT hood strut kit with every Maverick MRT exhaust purchase.
Application: 2022+ Ford Maverick 2.0L Ecoboost AWD
Doesn't Fit: 2022+ Ford Maverick 2.5L Duratec Hybrid / FWD
Hear the Difference
- How does it sound? The Maverick Street Performance Axle-back #92W310 has nice rumble and presence
- Is there drone or resonance? There's a nice exhaust presence with minimal drone
- What if I step on it? Well, get ready for a Ford Maverick with a little bit of attitude and a whole lot of fun
Are you located close to Plymouth, MI and need your exhaust system installed? Call MRT at 734-455-5807 to make an appointment today!
Product Quality- What kind of steel is it made from? Corrosion-resistant T304 stainless steel.
- Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA.
- How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)
Feel the Performance- What is the muffler design? Straight through design to provide maximum exhaust gas flow.
- What is the tube diameter? A large 2.5" tube is used for reduced exhaust flow restrictions.
- What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains.
Get Noticed- What kind of tip is it? MRT exhaust has 3.5" angle cut tip.
- What are my tip finish options? Standard in polished tip or black matte finish for incremental cost.
- How do I get noticed? Great sound and great looks turn heads and get positive comments!
- Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
- How long does it take to install? Installation time is about 1 hour and requires only common hand tools.
- What is included? All necessary hardware included.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- MRT Street performance straight through muffler design with rear exit, single tip
- DIY installation for quick install on the trail or off!
- T304 Stainless Steel for the best corrosion resistance
- Engineered, designed and manufactured in the USA
|
|
|
|
|
|
|
