 |
 |
 |
 |
The MRT Street Race cat back exhaust system for the C8 Corvette is the ultimate track car exhaust system and most aggressive in terms of sound. It's definitely your best choice for street performance sound. This system is a straight-through muffler delete design that is all about providing maximum flow and maximum performance that matches the performance sound and aggressive performance look of the C8 styling. This Corvette exhaust system is designed in an H pipe configuration for minimized back pressure flow and a deeper sounding exhaust note. This MRT cat back gives your C8 Corvette a definite, pleasant exhaust performance presence throughout the drive cycle and even provides a few burbles and crackles as you lift off the gas and between transmission shifts. It's an "I'm ready to roll" exhaust sound that clearly says I'm coming under vehicle acceleration.
MRT also designed a sport touring cat back exhaust for your C8 Corvette. This system is for someone who want to control the exhaust loudness with the throttle input giving an all-time sporty sound that is called to action with full throttle. Check out MRT Part #91S220 for more information and a sound clip of the system.
MRT designed the Street Race C8 cat back system to give you all the performance an exhaust system can give and is handcrafted in T304 stainless steel and mandrel bent 3" tube. The system comes standard with polished 4" quad tips and a black ops ceramic matte finish to match the sporty sound. This MRT Street Race cat back system is our loudest C8 exhaust with minimal very comfortable drone presence.
This MRT aftermarket exhaust system does not have the AFM and NPP valve simulators so each premium C8 exhaust includes a simple plug and play exhaust module to simulate the valves and avoid a check engine light (CEL) from appearing on your dashboard.
MRT's Street Race Cat back provides 32lbs of weight savings compared to the stock C8 exhaust system.
Application: 2020+ C8 Corvette 6.2L V8 engine Doesn't Fit: Other Corvette models
Hear the Difference
- How does it sound? The MRT Street Race Cat back gives an aggressive, get noticed exhaust tone that is present at all times.
- Is there drone or resonance? The drone is noticeable yet very comfortable for all driving conditions
- What if I step on it? Wide-open throttle brings out a more lively attitude with more exhaust sound, bite and a deeper growl.
MRT designed
the Street Race cat-back system is a direct fit for your C8 Corvette. Professional installation is recommended with an estimated 5-6 hour installation process. If you're located close to Plymouth, MI, one of MRT's mechanics will be happy to install the C8 Street Race Cat-back exhaust for you. Call MRT at (734) 455-5807 to make an
appointment.
91S225: 2020+ C8 Corvette MRT Street Race Cat-back Exhaust Sound Clip
Product Quality
- What kind of steel is it made from? Corrosion-resistant T304 stainless steel.
- Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA.
- How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)
Feel the Performance
- What is the muffler design? Straight through design to provide maximum exhaust gas flow.
- What is the tube diameter? A large 3" tube is used for reduced exhaust flow restrictions.
- What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains.
Get Noticed
- What kind of tip is it? Quad 4" double wall T304 stainless steel tips with beveled edges.
- What are my tip finish options? Stylish Polished Stainless Steel or Black Ops Matte Ceramic.
- How do I get noticed? Deep, nice, performance sound with a some burble between shift points
Installation
- Can I install this myself? Yes, however, MRT recommends installation by a professional exhaust shop.
- How long does it take to install? Installation time is about 5-6 hours largely due to removal of rear bumper, etc to access the exhaust.
- What is included? All necessary hardware included plus MRT Power Plates to simulate AFM functionality
A full installation video with step by step instructions is provided as a quick reference tool under the Product Details tab.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Designed for direct factory fit installation in an h-pipe configuration
- T304 Stainless Steel for the best corrosion resistance
- Engineered, designed and manufactured in the USA
|
|
 |
 |
 |
 |


|