2019–2024 Ram 1500 MRT Tough Truck Dual Cat-Back Exhaust System

Part Number: 92T802
Application: 2019–2024 Ram 1500 5.7L V8
Does Not Fit: Ram 1500 TRX, 3.0L Hurricane twin-turbo I6, 3.0L EcoDiesel turbo V6
Installation Time: Approximately 90 minutes
Warranty: Limited Lifetime
Tip Options: Polished T304 Stainless Steel or Black Ops Matte Black.

MRT's Loudest Ram 1500 Cat-Back — Built for Drivers Who Want to Be Heard

Some Ram 1500 owners want a subtle upgrade. Others want their truck to announce itself at every intersection, every trail head, and every wide-open throttle pull. The MRT Tough Truck Dual Cat-Back is built for the second group. Rated 10/10 for loudness, this is the most aggressive, head-turning cat-back exhaust MRT makes for the 2019–2024 Ram 1500 5.7L V8 — an always-on, high-performance exhaust tone engineered to match the truck's identity and let the HEMI breathe the way it was meant to.

Despite its maximum loudness rating, MRT's sound engineering keeps the Tough Truck livable. The drone rating of 2/10 means it's noticeable but tolerable at highway speeds — a trade-off that drivers who demand this level of presence will make without hesitation. Add your choice of polished T304 stainless or Black Ops matte black tips, and you've got a complete exhaust transformation that's as visually striking as it sounds.

Built from T304 stainless steel, manufactured and inspected in Plymouth, Michigan, and backed by a limited lifetime warranty.

Why Choose the MRT Ram 1500 Tough Truck Dual Cat-Back?

The Loudest MRT Cat-Back Available for the Ram 1500 5.7L — Always On, Always Aggressive

MRT engineers every exhaust system to match the specific character of the vehicle it's built for. For the Ram 1500 5.7L HEMI, that means a sound that reflects what this engine is capable of — a deep, authoritative V8 roar that's present at idle and unleashes fully at wide-open throttle. The Tough Truck Cat-Back is tuned to be heard at every throttle position, giving your HEMI the voice a truck of this caliber deserves.

The tone is aggressive and always present, but engineered to remain pleasant rather than grating. At maximum highway speed, the drone is noticeable — something enthusiast-grade sound at this level inherently delivers — but tolerable for drivers who've chosen maximum presence as their priority. If you want the HEMI to sound like the performance V8 it is, every single time you drive, this is your exhaust.

Full Cat-Back System — Maximum Restriction Eliminated

The factory Ram 1500 exhaust system is built around noise suppression at the expense of performance and sound character. The Tough Truck Cat-Back replaces the entire system from the catalytic converters back, tearing out every point of factory restriction with a straight-through muffler and large 3-inch mandrel-bent tubing. Smooth walls and carefully engineered bends minimize backpressure throughout the entire system, delivering a solid and immediate boost in horsepower, torque, throttle response, and acceleration. No tune required — bolt it on and feel the difference immediately.

Four-Stage Quality Inspection — Made to Outlast Your Truck

Every MRT Ram 1500 Tough Truck Cat-Back is engineered and manufactured in-house at MRT's Plymouth, Michigan facility and inspected a minimum of four times before it ships. That level of quality assurance is built into every stage of production, not bolted on at the end. Combined with T304 stainless steel construction throughout, the result is a system engineered to outlast your truck across years of daily driving, highway miles, and off-road use — without corroding, cracking, or losing the precision fitment it was built with.

Two Bold Tip Finishes to Complete the Look

The Tough Truck Cat-Back is available with two tip finish options. The Polished T304 Stainless Steel tips deliver a clean, premium mirror shine with 4-inch double-wall beveled edges that complement any Ram 1500 color combination. The Black Ops Matte Black finish brings an aggressive, stealth aesthetic that pairs perfectly with blacked-out trim packages and dark builds. Either way, the dual-tip exit makes a statement that backs up the sound coming out of it.

Application: 2019-24 Ram 1500 with V8 engine.

Doesn't Fit: Ram 1500 TRX, 3.0L Hurricane twin-turbo I6 engine, 3.0L EcoDiesel turbo V6 engine.

Hear the Difference

• How does it sound? MRT Tough Truck Dual Cat Back gives an aggressive, get noticed exhaust tone that is present at all times.
• Is there any drone or resonance? The drone is noticeable but tolerable.
• What if I step on it? Wide-open throttle brings out a more lively attitude with more exhaust sound, bite and a deeper growl.

Sound Characteristics

What You Can Expect to Hear

• Idle & Cold Start: Deep, commanding V8 presence from the first start — unmistakably louder and more aggressive than stock
• City Driving: An always-on, authoritative HEMI rumble that makes every trip through town an event
• Acceleration: A lively, muscular exhaust note with real V8 bite and a deeper growl than anything the factory system produces
• Wide Open Throttle: The full Tough Truck experience — a powerful, attention-grabbing V8 roar that makes clear what the 5.7L HEMI is built for
• Highway Cruising: Noticeable drone that's tolerable for most enthusiast drivers; road and tire noise blends with the exhaust note at steady speeds
• Overall Character: Always present, always aggressive — this exhaust does not hide itself and is not designed to

If you want a serious sound upgrade with more daily refinement, MRT's Deep & Mellow Dual Cat-Back (Part #92T800) delivers a 6/10 loudness experience with near-zero drone on the same 2019–24 Ram 1500 5.7L platform.

Key Features and Specifications

Product Highlights

• Maximum Sound Performance: MRT's loudest cat-back for the 2019–24 Ram 1500 5.7L V8, rated 10/10 loudness
• Full Cat-Back System: Complete replacement from catalytic converters back for maximum sound and performance gains
• Straight-Through Muffler Design: Eliminates restriction and maximizes exhaust gas flow throughout
• Four-Stage Quality Inspection: Every unit is inspected a minimum of four times before shipping
• Dual Tip Finish Options: Polished T304 Stainless Steel or Black Ops Matte Black
• Premium 4" Double-Wall Tips: Beveled edge design in T304 stainless for an aggressive, finished appearance
• DIY-Friendly Installation: All hardware included; no welding or fabrication required
• American-Made Quality: Engineered, designed, and handcrafted in Plymouth, Michigan
• No Tuning Required: Direct bolt-on performance upgrade
• Free Shipping: Complimentary delivery on all orders

Technical Specifications

• Material: Corrosion-resistant T304 stainless steel throughout
• Tube Diameter: 3.0-inch mandrel-bent for maximum flow
• Tip Size: 4-inch double-wall with beveled edges
• Tip Finish Options: Polished stainless or Black Ops matte black
• Muffler Design: Straight-through for reduced backpressure and maximum flow
• Loudness Rating: 10/10
• Drone Rating: 2/10 (noticeable but tolerable)
• Performance Rating: 8.5/10
• Compatibility: 2019–2024 Ram 1500 5.7L V8, 140.5" wheelbase
• Does Not Fit: Ram 1500 TRX, 3.0L Hurricane twin-turbo I6, 3.0L EcoDiesel turbo V6

Warranty and Quality Assurance

Limited Lifetime Warranty Coverage

Every MRT Tough Truck Cat-Back is backed by a limited lifetime warranty against defects in materials and workmanship. For as long as you own your 2019–2024 Ram 1500, your exhaust system is fully covered — a direct reflection of MRT's confidence in American-made craftsmanship and T304 stainless steel construction that's built to last.

With all manufacturing performed in-house at MRT's Plymouth, Michigan facility and a minimum four-stage inspection process before every unit ships, quality control is a built-in standard — not an afterthought.

FAQs: 2019-2024 Ram 1500 5.7L V8 Performance Exhaust

1. Will the MRT Tough Truck Cat-Back fit my Ram 1500?

The MRT Tough Truck Dual Cat-Back (Part #92T802) is designed for 2019–2024 Ram 1500 models equipped with the 5.7L V8 engine. It does not fit the Ram 1500 TRX, the 3.0L Hurricane twin-turbo inline-6, or the 3.0L EcoDiesel turbo V6. If you're unsure which engine your truck has or need to confirm exact fitment, call MRT at 734-455-5807 before ordering, and a sales associate will verify compatibility.

2. How loud is a 10/10 loudness rating in real-world driving?

A 10/10 loudness rating means the Tough Truck is MRT's most aggressive cat-back exhaust for the Ram 1500 — it is loud at every throttle level, from idle all the way to wide-open throttle, and it is always present. At idle and in city traffic, you'll hear a deep, commanding HEMI rumble. Under hard acceleration, it produces a powerful, attention-getting V8 roar. At steady highway speeds, there is a noticeable drone — manageable and tolerable for the target driver, but worth understanding clearly before purchase. This exhaust is built for drivers who want maximum sound presence with no exceptions. If a more refined daily driver experience is important to you, the Deep & Mellow (92T800) is the better fit.

3. Will this exhaust improve performance on the 5.7L HEMI?

Yes. By replacing the entire factory exhaust system from the catalytic converters back with a straight-through muffler and 3-inch mandrel-bent tubing, the Tough Truck significantly reduces backpressure and improves exhaust gas flow throughout the system. Smooth walls and optimized bends minimize flow restriction at every point, delivering a noticeable boost in horsepower, torque, throttle response, and acceleration from the 5.7L V8. No ECU tuning or reprogramming is required — the performance gains are available immediately from the moment you install it.

4. What tip finish options are available, and which should I choose?

The Tough Truck Cat-Back is available in two finishes. The Polished T304 Stainless Steel tips offer a premium mirror shine with 4-inch double-wall beveled edges that pair cleanly with any Ram 1500 build. The Black Ops Matte Black tips deliver a bold, aggressive stealth look best suited to trucks with blacked-out trim packages or dark exterior builds. Both options use the same T304 stainless steel construction and beveled edge design — the choice is purely visual. If you're unsure, polished is the more versatile option; Black Ops is the better match for darker, more aggressive truck aesthetics.

5. Does installing the Tough Truck Cat-Back require a tune?

No tune is required. The MRT Tough Truck Dual Cat-Back is a direct bolt-on upgrade that works with the factory engine management system without any ECU modification. No sensors, wiring, or powertrain parameters are affected by the installation. Bolt it on with standard hand tools and enjoy the performance and sound gains immediately.

6. What's the difference between the Tough Truck and the Deep & Mellow Cat-Back for the 2019–24 Ram 1500 5.7L?

Both systems use T304 stainless steel, 3-inch mandrel-bent tubing, straight-through muffler design, and the same tip options — but they're built for very different drivers. The Tough Truck (92T802) is rated 10/10 loudness and delivers MRT's most aggressive, always-on sound profile, with a drone that's noticeable but tolerable at highway speeds. The Deep & Mellow (92T800) is rated 6/10 loudness with a 2/10 drone rating, engineered for drivers who want a meaningful performance sound upgrade while keeping daily comfort fully intact. If maximum presence is the goal, the Tough Truck is the answer. If daily drivability matters as much as sound, the Deep & Mellow is the right call.

7. How difficult is the installation, and what's included?

Installation requires only common automotive hand tools and takes most owners approximately 1.5 hours working in their own driveway or garage. No welding, cutting, or modifications are required — every component bolts directly into place. All necessary mounting hardware is included, along with detailed step-by-step installation instructions. If you'd prefer professional installation and are located near Plymouth, Michigan, call 734-455-5807 to schedule an appointment at MRT's facility.

Ready to make your Ram 1500 the loudest truck on the road? Order today and enjoy free shipping on your MRT Tough Truck Dual Cat-Back. Questions? Call 734-455-5807 or use live chat during business hours.

Installation Made Easy

• Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
• How long does it take to install? Installation time is about 1.5 hours and requires only common hand tools.
• What is included? All necessary hardware included.