Home > Brands We Carry
Abbes Aero Products APR Performance
Barton Cold Air Inductions H&R Springs
JMS SCT
Sort By:
Page of 1
Aero Suds Wet-Wash Soap 16oz Aero Glass & Surface Cleaner 16oz Aero Finale Wipe Down

Aero Suds - Wet-Wash Soap - 16oz

SUDS Exterior Soap has been specially formulated to powerfully clean your car as it protects your wax finish. With harsh chemical and stripping agents, most soap can cause damage to your automobile.

Sure they may be easy to use, but along with removing dirt, they also remove your finish and protective coatings. That is why SUDS is the perfect balance of shielding your wax and protective coatings, while also removing unsightly dirt and road grime.

SUDS, the ultimate soap that helps to keep a shine on your paint without harsh stripping agents that can damage surfaces, is environmentally friendly and biodegradable. With SUDS you do not have to worry about water spots or causing “spider web” marks in your paint finish because of its revolutionary lubricating agents to remove the dirt.



Aero View - Interior and Exterior Window Cleaner - 16 oz.

Nothing says "clean car" better than having perfectly clean, streak-free windows and mirrors. At International Aero, when challenged with detailing the world's most exclusive aircraft, they needed nothing less than the perfect window cleaner. The AERO team invented VIEW, the ultimate glass cleaner. Not only will it remove the thousands of miles of dirt picked up in the atmosphere, but leaves the glass surface clean, clear and streak-free. If it performs this well on jets, just imagine the beautiful results you will receive on your car.

AERO VIEW Glass Cleaner is excellent for cleaning all glass surfaces. It quickly dissolves fingerprints, smudges, dust and dirt while leaving glass and mirrors with a brilliant streak-free shine. This fast acting formula does not streak and will not leave any residue making everything on your car from automotive glass to headlights crystal clear. The ammonia-free product is safe, yet powerful enough to remove unsightly dirt and grime.



Aero Finale - Interior and Exterior Multi Surface Cleaner - 16 oz.

To keep your car in showroom condition between washes, AERO FINALE was developed for those of us who like that fresh, clean feel of having the perfect car. Used by Pilots, Flight Attendants and Flight Crews around the globe, AERO FINALE has built a reputation over the years for keeping VIP aircraft in such a state.

Water spots, streaks and undesirable dust between washes are a thing of the past once you use FINALE on your automobile. Formulated for both interior and exterior surfaces, FINALE is an imperative step for every regular maintenance detail and in between FINALE allows your car to maintain that shine and luster of a newly waxed car between waxes. Its lubricating agents encapsulate dirt and grime allowing fragile surfaces on your car, such as paint, to be safe from scratches..

Not only does AERO FINALE add a desirable shine and polished look to your car, but it also places a thin, protective barrier between your car and the elements.

Aero Immaculate Interior Cleaner 16oz Aero Spot Carpet & Fabric cleaner 16oz Aero Away Tire & Engine Cleaner - 16 oz.

Aero Finale - Interior and Exterior Multi Surface Cleaner - 16 oz.

To keep your car in showroom condition between washes, AERO FINALE was developed for those of us who like that fresh, clean feel of having the perfect car. Used by Pilots, Flight Attendants and Flight Crews around the globe, AERO FINALE has built a reputation over the years for keeping VIP aircraft in such a state.

Water spots, streaks and undesirable dust between washes are a thing of the past once you use FINALE on your automobile. Formulated for both interior and exterior surfaces, FINALE is an imperative step for every regular maintenance detail and in between FINALE allows your car to maintain that shine and luster of a newly waxed car between waxes. Its lubricating agents encapsulate dirt and grime allowing fragile surfaces on your car, such as paint, to be safe from scratches..

Not only does AERO FINALE add a desirable shine and polished look to your car, but it also places a thin, protective barrier between your car and the elements.


Aero Spot - Carpet and Upholstery Stain Remover - 16oz

Aero Spot - Carpet and Upholstery Stain Remover Nothing is more unsightly than major stains or heavy soil marks in your car interior, which make it look aged and worn out. SPOT has been developed over many years, and is the exclusive and trusted stain remover of our own professional detail teams on Corporate, Heads-of State and VIP jets all around the globe.

SPOT will allow you to maintain your carpet and fabric upholstery just as owners of VIP aircraft have for years.

SPOT allows every driver to have pristine, impeccable carpet and fabric upholstery. Whether using SPOT to treat a large area or a persnickety, set-in stain from juice or stubborn dirt, the results are Spotless. While some carpet and fabric cleaners leave residues that attract dirt for future stains and spots, SPOT does not leave film and will keep the surface looking flawless. SPOT, which is perfect for colorfast carpet and fabric surfaces, is an all natural cleaner making it both biodegradable and perfect for your car.



Aero Protect - Tire, Plastic, and Vinyl Protectant - 16 oz.

In today's modern aircraft and automobiles, there are many different surfaces, and many of them are made of rubber, vinyl, or plastic. All of these materials tend to dry out and crack as the natural oils (in the case of rubber), or plasterers (in the case of plastics or fiberglass) "leach" over time. AERO PROTECT was designed to stop this from happening and ensure that your surfaces remain looking as good as new. In addition, unlike other treatments on the market, AERO PROTECT has been designed to penetrate the surface it is applied to. This prevents "SLING" which occurs when products are applied to tires and then flies off leaving dirt spots all over your freshly cleaned automobile, which means no more dirt spots showing up behind wheel wells or down the side of the automobile.

AERO PROTECT is formulated to recondition a plethora of surfaces. Anything from plastic, fiberglass, vinyl and rubber is a candidate for PROTECT's astounding protection and conditioning. AERO PROTECT also prohibits UV damage and other natural wear and tear from effecting the look and feel of these surfaces.

Aero Supple Leather Conditioner 16oz Aero Protect Tire & Vinyl Dressing 16oz Aero Shine Dry Wash & Speed Wax 16oz

Aero Supple - Leather and Vinyl Conditioner - 16 oz.

Developed to maintain the elite leather seats found on today’s private aircraft, and now it is available for your car. Imagine your seats looking and feeling as good as the day you drove your car off the showroom floor.

Using AERO SUPPLE will ensure that your leather seats last for the life of your automobile.It is not only the everyday use that causes leather to wear and tear, but using products containing substances such as silicone and waxes that are not specifically designed to condition and protect delicate surfaces similar to leather.

When exposed to the elements and everyday traffic, it is essential to replace natural oils into leather interior to prevent deterioration and aging. After completing a routine interior cleaning, apply SUPPLE to all leather surfaces to not only create a barrier of protection, but to bring back its original luster.



Aero Protect - Tire & Vinyl Dressing - 16 oz.


In today's modern aircraft and automobiles, there are many different surfaces, and many of them are made of rubber, vinyl, or plastic. All of these materials tend to dry out and crack as the natural oils (in the case of rubber), or plasterers (in the case of plastics or fiberglass) "leach" over time. In addition, unlike other treatments on the market, protect has been designed to penetrate the surface it is applied to. This prevents "Sling" which occurs when products are applied to tires and then "flies off" leaving dirt spots all over your freshly cleaned automobile, which means no more dirt spots showing up behind wheel wells or down the side of the automobile. Protect is formulated to recondition a plethora of surfaces. Anything from plastic, fiberglass, vinyl and rubber is a candidate for protects astounding protection and conditioning. Protect also prohibits UV damage and other natural wear and tear from effecting the look and feel of these surfaces. Tire and vinyl polish protects rubber, vinyl, plastic and fiberglass. Ozone and smog resistant, prevents sling.

  • Ozone and smog resistant, prevents sling
  • Formulated for aircraft, perfect for your car
  • Unsurpassed performance
  • Tire dressing that will not sling.
  • No oily residue, offers same value of protection on vinyl and plastic.
  • Will not dry-out surfaces.

Aero Shine - Dry Wash & speed wax - 16 oz.


AERO SHINE was formulated exclusively to clean, maintain and protect the extremely expensive painted surfaces found on private jet aircraft. Designed to withstand the harshest environments found on earth (and above), from a hot tarmac and temperatures that reach 120 degrees to the frigid -60 degree temperatures found at 50,000 feet above the earth. AERO SHINE was also designed and formulated to withstand the abrasive affects encountered in the atmosphere while flying at over 600 mph. With many airports around the world not allowing wet washing of airplanes, Aero Products developed SHINE in order to deliver the perfect Dry Wash Protectant.

SHINE is a revolutionary new method of washing and shining your car and providing a protective coating on your paint in minutes, without water. No buckets, no hoses, no rinsing and drying! Simply spray on the surface and wipe dry. With AERO SHINE you can conveniently and quickly wash your vehicle anywhere, anytime. The unique formulation dissolves dirt and stains such as tree sap and bugs. Special lubricating agents encapsulate the dirt so that it can easily be wiped off a car's delicate surface without scratching. It also leaves a protective film that provides gloss, color enhancement and smoothness that conventional car washes
fail to deliver.



Polymer infused carnauba wax by Aero 6-Pack Mini Aero International Detailing Traveler Kit Aero International Premium Car Detail Kit
We understand how important it is to have your vehicle in showroom condition. That's why we are bringing you a quick detail kit brought to you by AERO. This kit is assembled with six of AEROs top selling travel size products into a handy companion bag. This kit is perfect for that shine on the go. Traveler includes 6 top selling 2.5oz products, AERO embroidered carrying case and a high quality Pro Series 300 Microfiber towel. This way no matter where you are, you can detail your vehicle like a multi-million dollar aircraft.

International Aero, one of the largest and most well-respected private jet detailers in the world, is pleased to announce the creation of its new company, International AERO Products. AERO's new line of car care products, originally formulated to protect custom jet aircraft in the most extreme environments on the planet, pamper your vehicle inside and out - from the highest quality spray-and-wipe detailer to leather conditioner, glass cleaner, spray wax and more.
We understand how important it is to have your vehicle in showroom condition. That's why we are bringing you a quick detail kit brought to you by AERO. This kit is assembled with six of AEROs top selling travel size products into a handy companion bag. This kit is perfect for that shine on the go. Traveler includes 6 top selling full size products, AERO embroidered carrying case and a high quality Pro Series 300 Microfiber towel. This way no matter where you are, you can detail your vehicle like a multi-million dollar aircraft.
2005 - 2014 Mustang H&R Adjustable Front Sway Bar 1979 - 1993 Mustang H&R Super Sport Springs 1979 - 1993 Mustang H&R Sport Springs - Coupe & Hatchback
MRT found this great kit to flatten out those curves without giving your Mustang the harsh ride. The H&R adjustable front sway bar is made from cold rolled steel with forged ends and a unique Urethane/Teflon composite bushing that eliminates the need for lubrication and prevents squeaks. Improve the handling of your Fox body Mustang with the H&R super race lowering springs on the track . By lowering the center of gravity on your 1979 - 1993 Ford mustang fox body you will reduce body roll in corners , reduce squat during acceleration , and nose dive under hard braking conditions. Improve the handling and styling of the Fox Body Mustang with a superior quality product recommended for track use only .

The kit part #41D003 comes as a full set of four springs

Manufacturers Part # 51650-99

Note: Recommended for track use only

Retain the stock ride comfort while increasing the handling and styling of the 1979 - 1993 Ford Mustang Fox Body. By lowering the center of gravity on your Mustang Fox Body you will reduce body roll in corners, reduce squat during acceleration, and reduce nose dive under hard braking conditions. The sport type lowering springs from H&R provide excellent ride comfort for everyday driving and can be used for some light track use .

The kit part#41D200 comes as a full set of four springs.

Manufacturer Part # 51650
1987 - 1993 Mustang Convertible H&R Sport Springs 1979 - 1993 Mustang Coupe and Hatchback H&R Super Sport Springs 2011 - 2014 Mustang H&R Sport Lowering Springs
Retain the stock ride comfort while increasing the handling and styling of the 1987 - 1993 Ford Mustang Fox Body. By lowering the center of gravity on your Mustang you reduce body roll in corners, reduce squat during acceleration, and reduce nose dive under hard braking conditions. The sport type lowering springs from H&R provide excellent ride comfort for everyday driving and can be used for some light track use.

Note: For use on Convertibles only

The kit part #41D201 comes as a full set of four springs.

Manufacturers Part # 51654
Improve the handling of your Fox Body Mustang with the H&R Super Sport lowering springs while still retaining superior ride quality and comfort. By lowering the center of gravity on your 1979 - 1993 Mustang, you reduce body roll in corners, reduce squat during acceleration, and reduce nose dive under hard braking conditions. Improve the handling and styling of the Fox Body Mustang with a superior quality product that is comfortable enough for daily driving and some occasional track use.

The kit part #41D202 comes as a full set of four springs

Manufacturers Part # 51650-77
H&R has been producing top quality springs for nearly 40 years. The quality, design and construction are unsurpassed in the industry. The SPORT springs are the most popular spring in H&R's line-up.

Sport springs for the 2011 - 2014 V6/GT Mustang will lower your Mustang 1" in the front and 1.6" in the rear. This difference creates a lower center of gravity, improves handling and gives your Mustang a more aggressive appearance. Sport springs feature a spring rate that is firmer than that of the OEM springs, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use.

This spring set fits: V6, GT and Boss 302 Mustangs
2011 - 2014 Mustang Boss 302, GT, V6 H&R Super Sport Springs JMS PedalMAX Throttle Controller for 2011 - 2018 Ford Vehicles 10-15 Camaro JMS Throttle Response Controller
Application
2011, 2012, 2013, 2014 Mustang Coupe & Convertible (V6 and GT)


2012-2016+ GM JMS PedalMAX Throttle Enhancement Module 2005 - 2010 Ford JMS PedalMAX Throttle Enhancer 2008 - 2018 Mopar JMS PedalMAX Throttle Enhancer
Works on specific 2012 - 2015 GM Vehicles
  • 2014-16 Chevrolet SS
  • 2014-16 Chevrolet Corvette
  • 2012-16 Cadillac ATS (AWD & RWD)
  • 2016+ Camaro
  • Eliminate Pedal Lag and Turbo Lag on Gas & Diesel Vehicles
  • Improves vehicle acceleration and the overall driving experience is much better
  • Enhance low and mid-range horsepower and torque
  • Increase throttle response & make your vehicle easier to drive
  • Improves the shift feel on automatic transmission equipped vehicles
  • Eliminate stalling when accelerating from a stop on manual vehicles
  • Easy Plug & Play Installation
  • Installs in minutes
  • Can also be stacked with a JMS Custom Tune File delivered to the ECU via a SCT handheld.
The JMS PedalMAX Throttle Response Controller is a simple, affordable upgrade that greatly increases the responsiveness of your vehicle across the full RPM range. This product fits 2005 - 2010 Ford vehicles, including 2005 - 2010 Mustangs. (See Features section for complete list of applications.)

Offering easy plug and play installation, the JMS PedalMAX Controller lets you enjoy the performance benefits of this upgrade in a matter of minutes. No calibration adjustments are required. The controller will work with your vehicle, regardless of whether it is stock or heavily modified.

The JMS Throttle Response Controller is an easy and effective way to improve throttle response and driving characteristics on your Ford vehicle. It is a digital microprocessor-controlled device and dramatically improves throttle reaction and acceleration. The included dial allows you to adjust your throttle response from stock (0%) to all out race mode (100%) in a matter of seconds.

The JMS PedalMax controller can be stacked or used in conjunction with common aftermarket OBD-II programmers and monitors, including SCT Handheld Tuners. However, no additional calibration is required to reap the benefits.
  • JMS PedalMAX works onmost 2008 - 2018 Chrysler, Dodge & Jeep Vehicles
  • Eliminate turbo lag on turbocharges and diesel vehicles (improves vehicle acceleration).
  • Enhance low and mid-range horsepower and torque
  • Increase throttle response and make your vehicle easier to drive
  • Eliminate stalling when accelerating from a stop on manual transmission vehicles
  • Easy plug and play installation - installs in less than five minutes
  • Optional remote adjustment knob - use to dial in your exact throttle enhancement setting
  • Can also be stacked with a JMS custom tune file delivered to the ECU via an SCT handheld device
2013 - 2017 Ford Fiesta ST 1.6L JMS PedalMAX Throttle Controller for Turbo 2005 - 2014 Mustang H&R Rear Sway Bar Kit 2011 - 2017 Ford EcoBoost 3.5L JMS BoostMAX Controller

MRT found this great kit to flatten out those curves without giving your Mustang the harsh ride. The H&R rear sway bar with billet link assembly is made from cold rolled steel with forged ends and a unique Urethane/Teflon composite bushing that eliminates the need for lubrication and prevents squeaks.
  • Increases Low to Mid-Range Horsepower and Torque
  • Reduces Turbo Lag
  • Improves Acceleration
  • Increases fuel economy with normal use
  • Quick, Play and Play Installation
  • Can be used with SCT Tuner
This product will fit the following 3.5L Ford EcoBoost vehicles:
  • 2010-2018 Ford Taurus SHO
  • 2011-2018 Ford Flex
  • 2011-2018 Ford Explorer
  • 2014-2018 Police Interceptor Utility
  • 2013-2018 Police Interceptor Sedan
  • 2015-2017 Ford Expedition
  • 2015-2018 Lincoln MKC
  • 2010-2018 Lincoln MKS
  • 2011-2018 Lincoln MKT
  • 2011-2017 Lincoln Navigator
Ford EcoBoost 1.6L 2.0L JMS BoostMax Control Module 2015 - 2018 Ford 2.3L EcoBoost JMS BoostMAX 2.3L 2015 - 2018 Ford EcoBoost 3.5L JMS BoostMAX Controller
In minutes, dial in a custom boost setting for your 1.6L or 2.0L I-4 Ford EcoBoost engine with the JMS boost control module. Installation is truly plug and play. Just disconnect your stock MAP, TIP and Pedal connector, then plug in your new JMS Boost control module tuning device. Once you've installed the system, you'll benefit from reduced turbo lag, improved acceleration, and increased low to mid-range horsepower and torque. JMS provides an estimated average increase in horsepower of 25 RWHP.

Some customers have even reported an estimated gain of up to 2 MPG with normal use. The BoostMAX systems easy-to-use interface provides system status information and diagnostics at a glance. The included Remote Boost Adjustment Knob allows you to fine tune your boost setting and add up to 5 PSI. For maximum performance, this JMS BoostMAX Boost Enhancer can be stacked with the JMS PedalMAX Throttle Enhancer and a JMS Custom Calibration.

The JMS BoostMAX Boost Enhancer will work on all Ford models with 1.6L or 2.0L EcoBoost engines. See Features section for complete list of vehicle applications.


NOTE: FITS ONLY 2011 - 2014 Ford F150 3.5L EcoBoost (For other 3.5L EcoBoost applications, see part 73P000)

In minutes, dial in a custom boost setting for your Ford F150 with 3.5L EcoBoost engine with the JMS boost control module. Installation is truly plug and play. Just disconnect your stock MAP, TIP and Pedal connector, then plug in your new JMS Boost control module tuning device. Once you've installed the system, you'll benefit from reduced turbo lag, improved acceleration, and increased low to mid-range horsepower and torque. JMS provides an estimated 5 PSI of extra boost.


Some customers have even reported an estimated gain of up to 2 MPG with normal use. The BoostMAX systems easy-to-use interface provides system status information and diagnostics at a glance. The included Remote Boost Adjustment Knob allows you to fine tune your boost setting and add up to 5 PSI. For maximum performance, this JMS BoostMAX Boost Enhancer can be stacked with the JMS PedalMAX Throttle Enhancer and a custom tune.

The JMS BoostMAX Boost Enhancer will work on 2015-2016 Ford F150 models with 3.5L EcoBoost engines.

Each BoostMAX Kit Contains: BoostMAX Boost Enhancer, Plug & Play Wiring Harness, Remote Boost Control Knob, Installation Kit, Set of Instructions.
2015-2017 Ford EcoBoost 2.7L JMS BoostMAX Controller H&R sport lowering springs 10-11 Camaro V6 LS/LT Coupe 2010 - 2014 Camaro SS H&R Sport Lowering Springs
2010 - 2014 Camaro SS H&R Sport Lowering Springs
List Price: $389.99
Your Price: $319.99
  • Increases Low to Mid-Range Horsepower and Torque
  • Reduces Turbo Lag
  • Improves Acceleration
  • Increases fuel economy with normal use
  • Quick, Play and Play Installation
  • Can be used with SCT Tuner
This product will fit the following Ford 2.7L EcoBoost vehicles:
  • 2015-2017 Ford F150
  • 2015-2017 Ford Edge Sport
  • 2017 Ford Fusion Sport
  • 2017 Lincoln Continental
  • 2016-2017 Lincoln MKX
H&R Sport Spring for the 2010-2011 Chevy Camaro V6 LS/LT. This lowering spring kit is designed to manage the balance between performance and comfort. This set will lower your vehicle 1.4 inches in the front and 1.3 in the rear. This slight difference creates a lower center of gravity, improves handling and gives your car a more aggressive appearance. Firmer than that of the stock OEM set, but is still comfortable enough for daily use. Designed and Engineered to be an excellent choice for street and occasional track use.

Will not fit the Convertible models.
H&R has been producing top quality springs for nearly 40 years. The quality, design and construction are unsurpassed in the industry. The SPORT springs are most popular spring in H&R's line-up. Sport Springs for 2010-2014 Camaro SS Coupe will lower your Camaro 1.4 inches in the front and 1.3 in the rear. This difference creates a lower center of gravity, improves handling and gives your Camaro a more aggressive appearance. Sport springs feature a spring rate that is firmer than that of the stock OEM springs, but is still comfortable enough for daily use. Sport springs are an excellent choice for street and occasional track use.

The H&R Sport Springs will not fit the Convertible.
2010 - 2014 Shelby GT500 Barton Short Throw Shifter 2005 - 2009 Mustang APR Carbon Fiber Radiator Cooling Plate Cold Air Inductions 2005-2010 Dodge Challenger 5.7L CAI kit
2010 - 2014 Ford Mustang GT500 Barton Shifter features a 35% throw reduction and firm centering springs for a perfect 2-3 shift every time. Complete shifter replacement machined from 6061 T6 Billet Aluminum and 304 Stainless Steel. Harder durometer polyurethane bushings eliminate the mushy deflection. Easy Installation with no permanent modifications to your car.

Kit includes:
- Complete shifter assembly
- OEM style shifter arm
- M10x1.25 thread
The flow of air is not only limited to the outside of a car. To maximize cooling capabilities, a radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be.

To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.

Pre-preg. Carbon Fiber Manufacturing Process Designed for Easy Installation Fade Resistant Epoxy Coating

  • Superior quality and craftsmanship
  • Direct replacement
  • No tune required
  • Estimated average gains of 16 rwhp, 14 lbft
  • Up to 4 MPG increase in fuel economy
  • Made in USA
1994 - 2018 Ford Vehicles SCT X4 Power Flash Tune Programmer 2008 - 2015 GM SCT Performance X4 PowerFlash Tune Programmer 2005 - 2009 Mustang H&R Sport Lowering Springs
  • Increases Horsepower & Torque
  • Stores 10 Custom Tunes
  • Full color Backlit LCD Display
  • High Speed Data Logging / Monitoring
  • Reads / Clears DTC Trouble Codes
  • Easy Restoration Back To Stock
  • Dual Analog Inputs
  • Installs Quickly & Easily
  • User Adjustable Vehicle Parameters
Call MRT At 734-455-5807 To Verify Fitment For Your Vehicle
  • Increases Horsepower & Torque
  • Stores 10 Custom Tunes
  • Full Color Backlit LCD Display
  • High Speed Data Logging / Monitoring
  • Reads / Clears DTC Trouble Codes
  • Easy Restoration Back To Stock
  • Dual Analog Inputs
  • Installs Quickly & Easily
  • User Adjustable Vehicle Parameters
Call MRT At 734-455-5807 To Verify Fitment For Your Vehicle
H&R Sport Springs lower an 2005-2009 Mustang GT 1" front and 3/4" rear and a V6 approximately 7/8" front and 3/4" in the rear (excludes convertible). This difference creates a lower center of gravity, improves handling and gives your Mustang a more aggressive appearance. Sport springs feature a spring rate that is firmer than that of the OEM springs, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use. Fits 2005-2009 Mustang GT or V6 coupe Mustang.

H&R has been producing top quality springs for nearly 40 years. The quality, design and construction are unsurpassed in the industry. The SPORT springs are the most popular spring in H&R's line-up.
1996 - 2004 Mustang H&R Super Sport Springs non IRS 1994-2004 Mustang Convertible H&R Super Sport Springs 1979 - 2004 Mustang H&R Super Race Springs
Improve the handling of your Mustang with the H&R super sport lowering springs, while still retaining superior ride quality and comfort . By lowering the center of gravity on your 1996 - 2004 Ford mustang you will reduce body roll in corners , reduce squat during acceleration , and nose dive under hard braking conditions. Improve the handling and styling of the Mustang with a superior quality product that is comfortable enough for daily driving and some occasional track use .

The kit part#41D202 comes as a full set of four springs

Manufacturers Part # 51652-77

Product Fitment:
1996 - 2004 Mustang V6 & V8
2003 - 2004 Mach 1 Mustang
1996 - 1998 Mustang Cobra
2001 Mustang Bullitt

DOES NOT FIT IRS OR CONVERTIBLE MODELS

Improve the handling of your Ford Mustang Convertible with the H&R super sport lowering springs while still retaining superior ride quality and comfort . By lowering the center of gravity on your 1994 - 2004 Ford mustang you will reduce body roll in corners , reduce squat during acceleration , and nose dive under hard braking conditions. Improve the handling and styling of the Mustang with a superior quality product that is comfortable enough for daily driving and some occasional track use.

The kit part #441B008 comes as a full set of four springs.

Manufacturers Part # 51658-77

NOTE : Fits V8 Convertible models only.
Improve the handling of your 1996-2004 Mustang with the H&R super race lowering springs on the track . By lowering the center of gravity on your 1996-2004 Ford mustang you will reduce body roll in corners , reduce squat during acceleration , and nose dive under hard braking conditions. Improve the handling and styling of the Mustang with a superior quality product recommended for track use only .

The kit part #41D010 comes as a full set of four springs

Manufacturers Part # 51650-88

Note: Recommended For Track Use Only

Application:
1979 - 1993 Mustang V8
1994 - 1995 Mustang V8
1996 -2004 Mustang V6 & V8
1993 Mustang Cobra
1994 - 1995 Mustang Cobra
1996 - 1998 Mustang Cobra
1996 - 2004 Mustang H&R Sport Springs - non IRS 1996 - 2004 Mustang H&R Super Sport Springs 10-15 SS Camaro Cold Air Inductions CAI Kit
Retain the stock ride comfort while increasing the handling and styling of the 1996 - 2004 Ford Mustang. By lowering the center of gravity on your 1996 - 2004 Mustang you will reduce body roll in corners , reduce squat during acceleration, and nose dive under hard braking conditions. The sport type lowering springs from H&R provide excellent ride comfort for everyday driving and can be used for some light track use.

The kit part #41B200 comes as a full set of four springs.

Manufactures Part # 51652

Fitment:
2003 - 2004 Mustang Mach 1
2001 Mustang Bullitt
1996 - 2004 Mustang V6 & V8
Improve the handling of your 1996 - 2004 Ford Mustang with the H&R super sport lowering springs while still retaining superior ride quality and comfort . By lowering the center of gravity on your 1996 - 2004 Ford mustang you will reduce body roll in corners, reduce squat during acceleration, and nose dive under hard braking conditions. Improve the handling and styling of the Mustang with a superior quality product that is comfortable enough for daily driving and some occasional track use.

The kit part #41B201comes as a full set of four springs

Manufacturers Part # 51652-77
  • Up to 19 RWHP gain
  • Up to 20 ft-lb torque gain
  • Gain up to 3 MPG in fuel economy
  • No tune required
  • Performance look under the hood
  • Custom finishes available
  • Direct air box replacement
  • Made in the USA
10-15 Camaro V6 Cold Air Inductions Cold Air Intake C7 Corvette Rear Quarter Panel Inserts 2005 - 2009 Mustang APR Carbon Fiber Front Splitter
  • 16 RWHP gain
  • No tune required
  • Performance look under the hood
  • Quality construction & craftsmanship
  • Direct air box replacement
  • Made in the USA
Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

The rear quarter inserts by Abbes Design keep all of the functionality that comes standard on a C7, with a much tougher appearance. These pieces are sold unpainted, but can be ordered unpainted or with a Carbon Fiber overlay.

To combat the effects of front end lift, these Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
1999 - 2004 Mustang Cobra Coupe H&R Sport Lowering Springs w/ IRS 1999 - 2004 Mustang Cobra Convertible H&R Sport Springs 14-15 C7 Corvette Abbes Front Fender Attachments
Retain the stock ride comfort while increasing the handling and styling of the 1999 - 2004 Ford Mustang Cobra . By lowering the center of gravity on your 1999 - 2004 Ford mustang Cobra you will reduce body roll in corners , reduce squat during acceleration , and nose dive under hard braking conditions. The sport type lowering springs from H&R provide excellent ride comfort for everyday driving and can be used for some light track use .

The kit part #41D201 comes as a full set of four springs

Manufacturers Part # 51659


NOTE: Only fit 1999-2004 Ford Mustang With IRS suspension setup
Retain the stock ride comfort while increasing the handling and styling of the 1999 - 2004 Ford Mustang Cobra. Lowering the center of gravity on your Cobra w/ IRS you reduces body roll in corners, reduces squat during acceleration, and reduces nose dive under hard braking conditions. The sport type lowering springs from H&R provide excellent ride comfort for everyday driving and can be used for some light track use.

The kit part #41D201 comes as a full set of four springs.

Manufacturers Part # 51659-2

Application: Only fits 1999 - 2004 Ford Mustang Cobra Convertibles with IRS
Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

These Fender Attachments are featured in the new C7 Stingray Corvette complete body kit. They come standard unpainted, however they can be ordered either painted or with a carbon fiber overlay for a more aggressive appearance.

2005 - 2009 Mustang APR Carbon Fiber Rear Diffuser 2005 - 2009 Mustang APR Carbon Fiber Side Rocker Splitters 14-15  Corvette C7 Abbes Design Side Skirts
Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air.

To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

APR Side Rocker Extensions are the next step to help aerodynamically tune the handling of a car. Made of lightweight and durable carbon fiber composites, APR Side Rocker Extensions help reduce lift at high speeds by preventing air at the sides of the car from rolling underneath the car. The reduced lift helps to stabilize the car during high-speed cornering and helps to increase traction for faster lap times.
Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

As is standard for Abbes Design, these side skirts offer the C7 Corvette a lower appearance in addition to helping the aerodynamics of the car. These pieces are sold unpainted, but can be ordered unpainted or with a Carbon Fiber overlay.

C7 Corvette Abbes Design Rear Diffuser 15 C7 Corvette Chin Spoiler & Splitter C7 Corvette Abbes Design Rear Spoiler
Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette Diffuser compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

This rear diffuser was designed by Abbes for maximum lift reduction, keeping your C7 firmly planted regardless of the speed. This piece comes standard unpainted, but can be ordered either painted to match your vehicle, or with carbon fiber overlay.

Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

Not only does the front Chin Spoiler give the C7 Corvette an even lower, more aggressive appearance, it's completely functional. These pieces are sold unpainted, but can be ordered unpainted or with a Carbon Fiber overlay.

Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

The Abbes Design rear spoiler offers your Corvette optimum downforce, it does so without sacrificing the timeless Corvette appearance with a gaudy, large rear wing. These pieces are sold unpainted, but can be ordered unpainted or with a Carbon Fiber overlay.

2007 - 2009 Mustang Shelby GT500 APR Widebody Aerodynamic Kit 2015 C7 Stingray Corvette Abbes Design Body Kit
The GT-R Widebody aerodynamic Kit for the S197 Mustang gives an aggressive look while enhancing the smooth and subtle lines. This 10 piece kit helps to improve overall handling and traction. This aerodynamic kit increases the front stance by +45mm per front fender and +50mm per rear fender.

It allows installation of massive front wheel sizes of 20x9.5 with 285/30/20 profile tires and rear wheel sizes of 20x 12.5 with 345/25/20 profile tires. To enhance stability, the Mustang Widebody Aerodynamic Kit includes a carbon fiber front wind splitter that is designed as a front undertray. The optional 70 (1,778mm) GTC-500 Mustang Spec adjustable rear wing adds downforce on the rear wheels to increase rear-end stability.

This package includes:
- Widebody Front Bumper
- Carbon Fiber Wind Splitter/Undertray
- Widebody Front Fenders (45mm)
- Widebody Side Skirt
- Widebody Rear Fenders and Gas Door (50mm)
- Widebody Rear Bumper
Abbes Design set out with the goal of producing a timeless Aero Package which blends in with the C7's factory styling, and they have done just that. The Abbes C7 Corvette body kit compliments the OE body lines so well, those who weren't familiar with the vehicles factory aesthetics could easily assume that GM just took a more aggressive look right from the factory. All of the components from this kit are made from a two part Poly Rim. Each component from this body kit had to go through the rigorous German Tuev and testing which is uncontested as being the most difficult automotive testing process in the world. As an added bonus, Abbes designed this kit to use all of the OE mounting locations, so there is no additional modifications that need to be made to achieve precise fitment.

This kit includes:
2 Piece Front Splitter
2 Front Fender Accents (lh&rh)
2 Side Skirts (lh&rh)
1 Rear Diffusor
2 Piece Rear Spoiler (including base plate)
2 Rear Quarter Panel Inserts (lh&rh)